• German - Version
  • English - Version
  • Czech - Version
  • Romanian - Version
  • Hungarian - Version
  • Slovakian - Version
  • Filter

     

     

     

Cutting and Stripping

Electro-pneumatic crimping machines for loose, insulated and non-insulated wire end ferrules.

bt 712

Bench top crimping press

The semi-automatic bt 712 bench top model is compelling for its modern technology and sets new standards in quality and speed.

This all-purpose press accommodates the use of all common commercial crimping tools. The crimp force analyser, in combination with the bad part cutter, offers highest possible production quality.

 

Technical data

Crimping force 20 kN
Wire cross section up to 6 mm²
Programmable crimp height +5/-3 mm
Features easy to use, crimp force analyser

bt 722

Bench top crimping press

This bench top press is outstanding in terms of short cycle times, short changeover and setup times, programmable crimp height and the user-friendly TopTouch interface. These features, combined with the optional programmable stripper and bad part cutter, ensure top quality finished conductors regardless of the machine operator.

 

Technical data

Crimp force 20 kN
Wire cross section up to 6 mm²
Programmable crimp height +0.2/-0.8 mm
Features Integrated crimp force analyser, sequence processing

bt 752

Bench top crimping press

The Komax bt 752 delivers three processes in a single device: stripping, seal loading and crimping. Reliability and top production performance, e.g. short installation and setup times, coupled with the user-friendly TopTouch interface are the features that make this semi-automatic device such a compelling product.

 

Technical data

Crimp force 20 kN
Wire cross section up to 6 mm²
Programmable crimp height +0.2/-0.8 mm
Features Seal loading

MIKO

Networking of bench-top presses

MIKO (Manufacturing Interface Komax) is the name of the new data interface for bench-top machines bt 712, 722 as well as 752. With MIKO, you can integrate bench-top machines seamlessly into the production process, greatly improving product quality and production efficiency.

AM 02 C / AM 02.1 C

Electro-pneumatic crimping machines for loose, insulated and uninsulated ferrules

The AM 02 C / AM 02.1 C ("Compact") is an electro-pneumatic, modular stripper-crimper for rapid and reliable processing of loose insulated and uninsulated ferrules of small cross sections. Features: easy tool change, short tooling time, quick processing and crimping quality which conforms to DIN 46228.

> THONAUER delivers suitable ferrules as well.

 

Technical data

AM 02 C AM 02.1 C
Wire cross section 0.140.34 mm² 0.250.75 mm²
Crimping length 6/8 mm 510 mm

Unic-L / Unic-LS / Unic-LZ

Stripping and crimpping machines for loose, insulated ferrules.

Electro-pneumatic stripping and crimping machines.

> THONAUER delivers suitable ferrules as well.

 

Technical data

Unic-LUnic-LSUnic-LZ
Ferrules Single
Single
Twin
Wire cross section 0.52.5 mm² 0.52.5 mm² 2 x 0.52 x 1.5 mm²
Crimping length 8 mm 6/8/10 mm 8 mm

ECM 04 / UNIC-G / UNIC-GS

Stripping and crimping machines for insulated ferrules on reel.

Reliable processing of ferrules on reel. Crimping quality conforms to DIN 46228.

> THONAUER delivers suitable ferrules as well.

 

Technical data

ECM 04 UNIC-GUNIC-GS
Ferrules
Power unit Electrical Electro- pneumaticElectro- pneumatic
Wire cross section 0.5–2.5 mm² 0.5–2.5 mm²0.5–2.5 mm²
Crimping length 8 mm 8 mm8 / 10 mm
Features Easy change of cross section Automatic cross section selectionCrimping length 8 / 10 without tool change
Digital Product catalog
Top