WDT ToolTech AG

Depending on the contact type and cross-section, the right WDT-branded die for hand tools or machines can be used, easily and at low cost. The widest range of contact types can be processed in this way, from wire end ferrules to tube cable lugs or twisted contacts. Further dies and tool heads are available for almost all types of loose contact.

Technical Data

Set 441 red/blue/yellow	Set 66 (D)	Set RM 4	CSV 10 - F 4,8
0.5 - 6.0mm2 dies for insulated press cable lugs	0.1 - 10.0mm2 dies for insulated crimp cable lugs (mandrel crimp)	0.14 - 4.0mm2 dies for twisted contacts incl. RM positioner	0.5 - 1.0/1.5 - 2.5mm2 tabs + receptacle for 4.8mm width tabs to DIN 46247 Sheet 2

Battery Crimp Tool EHC 13

EHC 13 Battery Crimp Tool is designed for the crimping of loose piece contacts in small and medium volumes. Small and larger cross sections can be crimped in areas especially difficult to access. The ergonomic design and wide range of crimping profiles provides flexibility and efficiency to your manufacturing environment. The “Quick Connect System” combines the ability to change tool heads and die sets easily to provide several industry standard and custom crimp solutions. An additional benefit is offered with the cutting tool head, which provides the capability to cut cables up to a diameter of 54 mm.

Electric crimping machine for contact processing

The WDT UP15 electric crimping machine is the perfect introduction to contact processing. The extensive tool head system with the option for customer-specific solutions and the stepless tool head for ferrules ensures you will have maximum processing flexibility. The user-friendly touch display enables easy access to additional settings and service options. The linear movement with sequence control ensures the highest crimping quality. It is also suitable for automotive applications.

Technical data

Pneumatic crimping machine for loose contacts

The perfect tool for beginners because of its good value for money. Use of all WEZAG die sets also possible, with optional positioner.

Technical data

Pneumatic safety crimping machine for loose contacts

The patented safety mechanism does not release the crimp if the opening of the dies exceeds 5.9 mm. Therefore, safety protection covers are not needed which speeds up the production process.

Technical data

Pneumatic crimping machine for loose contacts

Due to its innovative design this almost maintenance-free machine needs less space. It is light and can be easily transported with the provided T-handle. Operation is simplified through the use of the safety foot pedal – the hands remain free to insert the terminals and the conductor. No tools are required for easy exchange of the die adapter.

Technical data

Pneumatic crimping machine for loose contacts

Powerful universal machine. Features: safety foot pedal offers short cycle time; tool-less die set exchange; integrated LED Illumination; integrated counter.

Technical data

Hydraulic crimp machine for loose contacts

The UP 65 hydraulic benchtop crimp machine offers even more power for processing loose electrical contacts of up to 400 mm². Owing to the newly-developed, integrated hydraulic unit, the machine is space-saving, quiet and easy to install. The machine is flexibly usable, since it has to be connected only electrically.

Technical data

Hydraulic table crimping machine

The UP 150 is a real space saver thanks to its integrated hydraulic power unit. This powerful machine makes the processing of large cross-sectional areas easy. One highlight is its integrated crimp force monitoring system, which always gives the right result. This table crimping machine also allows the crimping range and stroke to be set individually.

Technical data