• German - Version
  • English - Version
  • Czech - Version
  • Romanian - Version
  • Hungarian - Version
  • Slovakian - Version
  • Filter



  • Kabelbearbeitung

  • EMV

  • Verbindungstechnik

  • Kabelbearbeitung

  • Crimptechnik

  • Prüftechnik

  • Schrumpfen

  • Kabelbearbeitung

  • Wickeltechnik


For over 30 years, the ULMER name has stood for the creation of machinery and systems at a high technical level. Technically right up to date, ULMER continues to tap into new growth sectors such as renewable energy, electric vehicles and hybrid vehicle technology.


SAR800 – 1250

Spool Unwinder SAR800 - 1250

The tension-free cable dispenser can feed the uncoiled material to the assembly machines without counter-drawing. The non-contact sag control eliminates errors such as material-damaging stretching of the insulation sheath.

The device settings allow individual adaptation to the workplace at hand. The unwinding speed can be controlled with the DHS1000 D non-contact sag control or a KSP/LSP series cable accumulator.

Technical data

Drive:Three-phase motorThree-phase motorThree-phase motor
Velocity:max. 2,0 m/smax. 2,0 m/smax. 2,0 m/s
Length:1800 mm2000 mm2300 mm
Width:1760 mm1920 mm1980 mm
Height:1320 mm1440 mm1510 mm

SM 15 2PLC / SM 30 2PLC

Cutting machine

The extremely reliable and solid universal cutting machine has been designed to process a wide range of different materials. In addition, Ulmer and Thonauer can also adapt the cutting machine to your needs.

Punching cut for tubes, foamed rubber, sealing profiles. Shearing cut for flat and round cables and stranded wire, shrinking tubes. Tube cut for several tube materials.

Optional bevel cut blades available.


Technical data

SM 15 2PLCSM 30 2PLC
Length range0,1–999,999 mm
Max. passage height15/30 mm15 mm
Max. passage width150 mm300 mm

SG 400 V

Cutting machine

The SG 400 V has been designed especially for the cutting of large-sized cables or lateral cuts respectively. Multi-core cables are cut to an outside diameter of 26 mm and cross section of up to 150 mm².

The robust and powerful feeder (as used in the ZG 400 B2) enables precise positioning of the cutting material.


Technical Data

Max. length input0,1–999,999 mm
Throughput height/widthup to 30 mm
Upper belt liftPneumatic, to a limited extent mechanical

SSM 60 / SSM 800

Hose cutting machine

The hose cutting machine SSM 60 is suitable for cutting closed and slit corrugated tube, PVC, rubber hose as well as further types of hose with an outer diameter of up to 60 mm. The use of the guillotine cut (blade is fixed in a 45° angle) makes for a precise cutting angle as well as high cutting quality.


Technical Data

SSM 60SSM 800
Length range0,1–999,999 mm
Max. throughput heightup to 60 mmup to 20 mm
Max. throughput widthup to 60 mmup to 800 mm
Cutting headPneumatically operated

WSM 30E / WSM 60E / WSM 60ESB

Corrugated tube cutting machine

Corrugated tubes are used in slit and non-slit versions to protect cables and harnesses, for instance, in the automotive and machine construction industries. Tubes from medical devices or white goods can also be processed. Precise and reliable cutting at the wave top is important. High cutting quality is important to ensure tightness at the contact point. 

To do this, a rotating knife is used to avoid sharp edges damaging inner wires.


Technical Data

Length range0,1–999,999 mm
Throughput height/width7–32 mmup to 60 mmup to 60 mm
Feeding length200 mm200 mm1000 mm
Anrufen E-Mail Top

Callback Service

Callback Service
We would be happy to call you back for a consultation!