Reatec AG

The standard strips have been designed for use under normal, clean and dry conditions, which ensure that the indicator points do not come in contact with grease, oils, solvents or moisture. Contact with these substances could lead to a fake colour change.

The self-adhesive (non-adhesive possible) strip with 10 elements measure 5 x 95 mm (temperature ranges 37.8 °C to 265 °C).

REATEC® temperature indicators are an important alternative to thermometers. They can be used for those applications for which thermometers fail, owing to their size, rigidity, shock sensitivity or for other reasons.

For use around damaging substances such as water, oil, fat and solvents.

Ranges P01, P1A, P2A and P03 (20 x 105 mm) are fully sealed, ranges P3A, P04 and P41 (25 x 110 mm)  will be fully sealed only if the covering adhesive foil is carefully stuck on a smooth, clean surface.

Type P indicator strips are less sensitive to compression. They are therefore particularly suitable for applications on presses, calender rolls, etc.

Strips with narrow increments are not available in REATEC Type P.

Mini Individual Points, 5 x 7 mm (standard type)

Available for all temperatures listed. From 37.8 °C to 264 °C paper backed 

Indicator Points, 17 x 17 mm (Type P)

(indicator element protected on both sides by foil) can be supplied for list temperatures of 37.8 °C to 121 °C. They correspond to Type P. 

Indicator Points, round (Type P)

may be ordered for customer-specific applications with large quantities