• German - Version
  • English - Version
  • Czech - Version
  • Romanian - Version
  • Hungarian - Version
  • Slovakian - Version
  • Filter

     

     

  • Kabelbearbeitung

  • EMV

  • Verbindungstechnik

  • Kabelbearbeitung

  • Crimptechnik

  • Prüftechnik

  • Schrumpfen

  • Kabelbearbeitung

  • Wickeltechnik

MAV Prüftechnik

The range includes electronic test equipment with manual drives, electronic testing machines with motor drives, tools, software and calibration accessories. MAV PRÜFTECHNIK GMBH has many years of experience in toolmaking. They offer a large variety of standard tools which cover many different applications.

 

CGT

Manual test device

Electronic force test devices for checking the clamping force in cable tie guns. Suitable for both manual and pneumatic cable tie pliers. The device has a rugged and low-maintenance mechanism and can be used with a large number of cable tie guns thanks to a variety quick-change tools. Optionally available as “CGT” with dot matrix touch display or as “CGT-Touch” with color touch screen and a higher display resolution.

 

Technical data

CGTCGT-Touch
Measuring systemOnly tensile force range
Max. force range500 N1,000 N
OperationWith a clamped cable tie gun
Measured value storage-4,000 measured values
InterfaceRS232

FT

Manual test device

Electronic force test device with hand lever operation and digital display for the measurement of tensile forces, e.g. on pre-assembled lines with crimped, soldered, welded, glued and similar connections on flat plugs, cable lugs, wire end sleeves, etc. Thanks to the simple and precise handling by means of the hand lever and parallel load carriage, the device is ideal for use in production plants as well as in test laboratories and similar test facilities. Optionally available as “FT” with dot matrix touch display or as “FT-Touch” with color touch screen and a higher display resolution.

 

Technical data

FTFT-Touch
Measuring systemMainly tensile force; compressive force possible as well
Max. force range1,000 N
OperationLever
Measured value storage10,000 measured values4,000 measured values
InterfaceRS232

KMG

Manual force measuring device

Force display with compatible force transducers to check tensile and compressive forces in mobile and stationary applications. Up to 8 force transducers with maximum power ranges between 50 N and 10,000 N can be registered at the same time. The detection of the respective connected force transducer takes place automatically. Due to its compact design, the device is also suitable for the calibration at production locations directly on site. Furthermore, the force measurement device is characterized by its high measurement resolution and simple operation via color touch screen.

ETM - Serie

Motorized Tester Models

Re-designed model series for tensile and compressive force measurements with a high level of measurement accuracy and a simple control concept and durable construction. High internal measurement frequency and resolution to ensure the highest degree of accuracy.

 

Technical data

ETM-FETM-AETM-M
Max. indication range10 kN10 kN10 kN
Drive systemMotorMotorMotor
Testing speeds (at max. 3000 N)50/75/100/800 mm/minSettable 5–800 mm/minSettable 5–800 mm/min
Additional functions (Excerpt)--Break-stop function, Cycle test, Force pre-selection for non-destructive testingBreak-stop function, Cycle test, Force pre-selection for non-destructive testing, Repeat testing between two positions
Anrufen E-Mail Top
Schließen

Callback Service

Callback Service
We would be happy to call you back for a consultation!
captcha