• German - Version
  • English - Version
  • Czech - Version
  • Romanian - Version
  • Hungarian - Version
  • Slovakian - Version
  • Filter

     

     

  • Kabelbearbeitung

  • EMV

  • Verbindungstechnik

  • Kabelbearbeitung

  • Crimptechnik

  • Prüftechnik

  • Schrumpfen

  • Kabelbearbeitung

  • Wickeltechnik

Mecalbi – Engineering Solutions, Lda.

Mecalbi specializes in the development of mechatronics solutions and systems with technological expertise in the fields of industrial engineering, mechanical engineering, electronics and information technology.

 

STCS-B / STCS-L / STCS-PHD

Hot air: Shrinking Tube Control System

The aim of automated shrinking of heat shrink tubing is to reduce processing time and increase quality. To achieve this, our hot air products are a good starting option. They are produced and installed according to customer-specific requirements.

 

Technical Data

STCS-BSTCS-LSTCS-PHD
Temperature range150350 °C
MountingBench topMounted on panel using a suction vacuum pump
Shrinking Chamber15 x 50 mm15 x 50 mm80 x 50 mm

STCS-VM / STCS-BWT

Hot air: Shrinking Tube Control System

The VM and BWT Series with customer-specific product holder enables the processing of several products at the same time. This leads to a time reduction of 50 to 70 %. During processing time an operator can load and unload the product holder.

 

Technical Data

STCS-VMSTCS-BWT
Temperature range150350 °C
Shrinking chamberCustomer-specific
Position of hot air unitFrom the topFrom the bottom

STCS-PHDir

Infrared shrinking device to work at the assembly board

Easy to use and reliable in result. The device is used directly on the assembly board to shrink the shrink tubing. Infrared radiation, instead of hot air, shortens the process time. The parameters can be selected by means of a bar code reader.

 

Technical data

Working temperature250–550 °C
Shrinking tube diameterup to 14 mm
Shrinking tube lengthup to 65 mm

STCS-evo500TS / STCS-RCM

Infrared: Shrinking Tube Control System

The evo500TS is the bestseller in the STCS Series. It is characterised by an extraordinarily high processing speed. The enclosure of the tube leads quickly to a constant temperature around the heat shrink tubing. A reasonable result is achieved within seconds. The STCS-RCM offers an additional centering function, which pushes the tube automatically above the uninsulated area.

 

Technical data

STCS-evo500TSSTCS-RCM
Temperature range250550 °C300550 °C
Max. tubing length75 mm4575 mm
Max. tubing diameter20 mm21 mm
Centering functionnot integratedintegrated

STCS-CS14 / ISAC14

Infrared Shrinking Tube Control System

The compact and lightweight STCS-CS14 is ideal for high production quantities. The touch display enables convenient operation. Networking is possible via an Ethernet interface. The ISAC14 is an add-on for the integration into the STCS-CS14 in order to have the heat shrink tube automatically centered on the sealing zone and check whether a tube with the correct length is being used. 

Technical data

Temperature range300550 °C
Max. tubing length60 mm
Max. tubing diameter25 mm

STCS-CS19

Infrared: Shrinking Tube Control System

The CS19 shrinking system is the ideal choice for processing medium or high volumes. It is designed for workbench applications and can process several parts at the same time. The system has a conveyor with two sets of timing belts that grips the wires with the sleeves and feeds them into an infrared oven for the shrinking process. The assemblies are then carried through a cooling zone and deposited in a collection bin. The parameters can be easily set and controlled.

 

Technical Data

Temperature range400600 °C
Work area140 x 285 mm
Max. tube diameter30 mm

STCS-VMir / VMir+

Infrared Workbench Shrink System

The STCS-VMir is a heat shrink system, based on infrared technology. It is designed for workbench applications and can process several parts at the same time. The same machine can be used on several applications, since it is equipped with a fast exchangeable shrinking chamber system. The STCS-VMir+ is a variation of the VMirs with a larger shrink chamber.

 

Technical data

VmirVMir+
Working temperature250400°C (at the Infrared resistor)250–500°C
Shrinking chambermax. 120 x 120 mm225 mm x 100 mm
ProgrammingTouch Screen, PC
Program selectionTouch Screen, Bar Code

STCS-RT / STCS-CRT

Infrared: Shrinking Tube Control System

The RT und CRT versions hold and position the cable, connector and heat shrink tube. Due to the dual chamber, the operator can load and unload one side whilst the other is processed. A variety of products can be processed at the same time.

 

Technical Data


STCS-RTSTCS-CRT
Temperature range400550 °C
Heating area95 x 285 mm
Open sidesProduct can stand out on 2 sidesProduct can stand out on 3 sides

STCS-LC

Shrink tunnel

The STCS-LC (Longitudinal Conveyor) is a heat shrink system based on infrared resistors, which is able to process several and different types of parts at the same time. Different from any other, the LC guarantees flexibility by shrinking virtually almost everything. From normal splices to special applications, one single machine can do it all.

 

Technical data

Working temperature250400 °C (at the Infrared resistor)
Heated width approx. 400 mm
Tunnel heightapprox. 100 mm
ProgrammingTouch Screen, Barcode or PC
Program selectionTouch Screen, Barcode

STCS-BLT

Splice testing unit

An easy but reliable device to test the sealed splice connection by applying a bubble test and a leakage detection.

Digital product catalog
Anrufen E-Mail Top
Schließen

Callback Service

Callback Service
We would be happy to call you back for a consultation!