• German - Version
  • English - Version
  • Czech - Version
  • Romanian - Version
  • Hungarian - Version
  • Slovakian - Version
  • Filter

     

     

  • Kabelbearbeitung

  • EMV

  • Verbindungstechnik

  • Kabelbearbeitung

  • Crimptechnik

  • Prüftechnik

  • Schrumpfen

  • Kabelbearbeitung

  • Wickeltechnik

Manufacturing the wiring harness

 

 

Zeta 640 / 650

Fully automatic cable assembly machine

Different cables and contacts are processed automatically without having to change over. This makes batch size 1 possible without any special effort. The manufacturing time is reduced by up to 50 % compared to traditional manual methods. A consistent data flow from the planning software to production reduces errors and increases cost-effectiveness.

At the end you get the cables you require in the correct order with the desired marking, and bundled ready for further processing.

 

Technical data


Zeta 640Zeta 650
Number of stations / with expansion5 / 108 / 13
Number of cables36
Process modulesCrimping, fitting seals, twisting, tinning, sleeve loading, double gripper, ferrules, MIL crimping, welding, ultrasonic compaction
Quality assuranceIntegrated crimp height and pull-out force measurement, crimp force monitoring, splice detection, incision monitoring, material change detection and material verification, Seal position monitoring, contact end detection

Zeta 630

Harness Manufacturing Zeta

The Zeta 630 makes switchboard construction efficient and just in time. Thanks to the economical automation process, cable assembly is highly productive, starting with batch size 1. Automated processes and lot or sequential production without retooling shorten production times by up to 50 percent. The automatic wire changer provides up to 36 different lines, and the CM 1/5 GS module processes up to five different wire end ferrules. The reliable, fully automated production ensures consistent high quality.

 

Technical data

Line cross-sections0.22–6 mm² (AWG 24–AWG 10)
Wire changermax. 36 wires (in steps of 6 wires)
Lengths with double-sided processing240–3,000 mm standard trough;
240–5,000 mm optional
Lengths with one-sided processing85–3,000 mm standard trough;
85–5,000 mm optional
Number of stations2

DLW – Digital Lean Wiring

Software for switch cabinet construction

With an efficient data processing, the DLW (digital lean wiring) software from Komax provides automation in switch cabinet construction. This means that a significant amount of time is saved in comparison to manual manufacturing, even with a batch size of 1.

Compared to conventional ECAD systems, the usage does not cause any cost-intensive maintenance of the components since the cable length can be determined by virtual wiring. It can be done by means of a photograph of the cabinet or a 2-D drawing. Existing data can easily be imported. Alternatively, Komax offers a camera for photographic dimensioning with a round shot in several individual images. The images are then put together into a dimensionally accurate overall picture and imported into the DLW.

The DLW also features an easy-to-handle user interface with touch screen. The DLW Viewer guides the operating staff through the entire wiring path, allowing even less specialized personnel to perform this step.

MES – manufacturing execution system

Software solution for the cable processing industry 4.0

The production software jointly developed by Komax and iTAC has been perfectly custom-tailored to the needs of cable manufacturing. The end-to-end solution has been designed for the entire value chain – from goods receipt through all production steps all the way to goods issuing – of cable processing companies of any size.

The software can be used for automated planning, control and monitoring of the entire production: machines, manual workplaces, auxiliary materials, material flow, resources, etc. Processes can be optimally standardized, defective production can be prevented, and the product quality can be significantly boosted. This makes it possible to produce complex products in the desired quality on schedule.

EasyWiring

Electronic harness assembly board

An electronic harness assembly board allows different wiring harnesses to be produced without having to make a board for each harness. This eliminates the need for storage of harness assembly boards. Subsequent changes in the wiring harness can be implemented quickly. Installation instructions are displayed online, thus reducing faults in the manufacture of the cable harness.

 

Technical data

Wiring harness lengthup to 11 m
Screen sizeup to 82" modular

EasyTouch

EasyWiring Additional functions

Touch mode
EasyTouch automatically detects when an operator touches the cable end. The cable identification as well as the routing and pinning information are transmitted and displayed directly to the EasyWiring wiring harness assembly board. This makes the operation of your electronic cable harness assembly board even faster and easier.

 

Continuity test mode
By connecting a plug connector to the test unit, the continuity test can be performed on a single connector during the cable harness assembly process. This way, errors are pointed out to the operator who can rectify them more quickly. But when you create all connections to the EasyTouch test unit, a final testing of the entire cable harness is performed. A comprehensible test report is delivered. It ensures a strict quality control. This function makes your production more efficient and boosts quality.

Digital product catalog
Anrufen E-Mail Top
Schließen

Callback Service

Callback Service
We would be happy to call you back for a consultation!