• German - Version
  • English - Version
  • Czech - Version
  • Romanian - Version
  • Hungarian - Version
  • Slovakian - Version
  • Filter

     

     

     

Heat Shrinking

The focus of automated shrinking of shrinking tubes is on saving time and boosting quality.

STCS-B / STCS-L / STCS-PHD

Hot air: Shrinking Tube Control System

The aim of automated shrinking of heat shrink tubing is to reduce processing time and increase quality. To achieve this, our hot air products are a good starting option. They are produced and installed according to customer-specific requirements.

 

Technical Data

STCS-BSTCS-LSTCS-PHD
Temperature range150350 °C
MountingBench topMounted on panel using a suction vacuum pump
Shrinking Chamber15 x 50 mm15 x 50 mm80 x 50 mm

STCS-VM / STCS-BWT

Hot air: Shrinking Tube Control System

The VM and BWT Series with customer-specific product holder enables the processing of several products at the same time. This leads to a time reduction of 50 to 70 %. During processing time an operator can load and unload the product holder.

 

Technical Data

STCS-VM STCS-BWT
Temperature range 150350 °C
Shrinking chamber Customer-specific
Position of hot air unit From the top From the bottom

STCS-evo500TS / STCS-RCM

Infrared: Shrinking Tube Control System

The evo500TS is the bestseller in the STCS Series. It is characterised by an extraordinarily high processing speed. The enclosure of the tube leads quickly to a constant temperature around the heat shrink tubing. A reasonable result is achieved within seconds. The STCS-RCM offers an additional centering function, which pushes the tube automatically above the uninsulated area.

 

Technical data

STCS-evo500TS STCS-RCM
Temperature range 250550 °C 300550 °C
Max. tubing length 75 mm4575 mm
Max. tubing diameter 20 mm 21 mm
Centering function not integrated integrated

STCS-CS14

Infrared Shrinking Tube Control System

The compact and lightweight machine is ideal for large production requirements. The touch display enables a comfortable operation. Networking is possible through an Ethernet Interface.

 

Technical data

Temperature range 300550 °C
Max. tubing length70 mm
Max. tubing diameter25 mm

STCS-CS19

Infrared: Shrinking Tube Control System

The CS19 shrinking system is the ideal choice for processing medium or high volumes. It is designed for workbench applications and can process several parts at the same time. The system has a conveyor with two sets of timing belts that grips the wires with the sleeves and feeds them into an infrared oven for the shrinking process. The assemblies are then carried through a cooling zone and deposited in a collection bin. The parameters can be easily set and controlled.

 

Technical Data

Temperature range 400600 °C
Work area 140 x 285 mm
Max. tube diameter 30 mm

STCS-VMir

Infrared workbench shrink System

The STCS-VMir is a heat shrink system, based on infrared technology. It is designed for workbench applications and can process several parts at the same time. The same machine can be used on several applications, since it is equipped with a fast exchangeable shrinking chamber system.

 

Technical data

Working temperature250400°C (at the Infrared resistor)
Shrinking chambermax. 120 x 120 mm
ProgrammingTouch Screen, PC
Program selectionTouch Screen, Bar Code

STCS-RT / STCS-CRT

Infrared: Shrinking Tube Control System

The RT und CRT versions hold and position the cable, connector and heat shrink tube. Due to the dual chamber, the operator can load and unload one side whilst the other is processed. A variety of products can be processed at the same time.

 

Technical Data


STCS-RT STCS-CRT
Temperature range 400550 °C
Heating area 95 x 285 mm
Open sides Product can stand out on 2 sides Product can stand out on 3 sides

STCS-LC

Shrink tunnel

The STCS-LC (Longitudinal Conveyor) is a heat shrink system based on infrared resistors, which is able to process several and different types of parts at the same time. Different from any other, the LC guarantees flexibility by shrinking virtually almost everything. From normal splices to special applications, one single machine can do it all.

 

Technical data

Working temperature250400 °C (at the Infrared resistor)
heated width approx. 400 mm
Tunnel heightapprox. 100 mm
ProgrammingTouch Screen, Barcode or PC
Program selectionTouch Screen, Barcode

STCS-BLT

Splice testing unit

An easy but reliable device to test the sealed splice connection by applying a bubble test and a leakage detection.

Digital Product catalog
Top