• German - Version
  • English - Version
  • Czech - Version
  • Romanian - Version
  • Hungarian - Version
  • Slovakian - Version
  • Filter



  • Kabelbearbeitung

  • EMV

  • Verbindungstechnik

  • Kabelbearbeitung

  • Crimptechnik

  • Prüftechnik

  • Schrumpfen

  • Kabelbearbeitung

  • Wickeltechnik

Cable winding, binding, deposit

Cable supply systems can be used together with cutting and stripping machines and offer a quick replacing of cable coils.


ads 112

Wire pull machine

The ads 112 wire pull machine is the perfect choice for the optimum feeding of wires from reels, Conipacks or drums. Wire is transported by two synchronous toothed belts. Wires ranging from fine to coarse are fed powerfully yet gently to the processing stations, as are non-round wires. Changeovers are quick and easy.


Technical Data

Wire cross sectionup to 28 mm
Width of flat cablemax. 28 mm
Weight of wire reelmax. 100 kg

ads 115

Wire delivery system

The Komax ads 115 is a wire feed system that can be used very flexibly with Komax automatic cutting and stripping machines. You can easily change the position of the linear storage unit to put it in the ideal spot for every application. Reels up to 400 mm in diameter, loose rings and ribbon cable can be used on the de-reeling stand. The quick clamping system allows the various reels to be changed quickly.


Technical Data

ReelsDia. 600 mm x width 250 mm x core dia. 1495 mm
Wire cross sectionmax. 4 mm²
Weight holding capacitymax. 20 kg

ads 119 / ads 123

Wire delivery system

The reel-clamping system is combined with a simple lifting mechanism that allows you to change heavy wire reels effortlessly. Convenient setup functions like slow advance and reverse travel make rapid reel changes even easier. The powerful motor operates extremely quietly and smoothly.


Technical Data

 ads 119ads 123
Wire reel: Max. diameter
Max. width
Max. weight
  600 mm
500 mm
100 kg
  1000 mm
750 mm
600 kg
Wire: Diameter
Wire cross-section
  up to 15 mm
up to 35 mm²
  up to 35 mm
up to 95 mm²

Komax 106

Cable feed system

The Komax 106 is an active feed system that is especially suitable for the processing of a wide range of different lines at high speed. The feed takes place from loose rings, from cable drums, Conipacks or central cable storage systems. The device can be operated both as a “stand alone” unit and in combination with all cable processing machines. A compatible interface is available for Komax machines in particular.


Technical data

Cable diameter up to 4 mm
Feed speed max. 6 m/sec.
Special featuresControl algorithm with self-learning mode


Cable feed system

The motorized feed system F1150 is the latest in the Komax product range for the automatic processing of low-tension cable reels up to 300 kg. The device can process a wide range of round cables and is particularly suitable for tension-sensitive cables, e.g. coaxial cables. This cable feed system is highly compatible and can easily be integrated into a complete cable processing line.


Technical data

max. diameter,
max. width,
max. weight

800 mm,
650 mm,
300 kg

Optionally 18/35 mm,
95 mm²
Weight300 kg
Special featuresSetup system via remote control

dps 375

Deposit system

The variable dps 375 wire deposit system has a mobile frame and active wire ejection for process-orientated use. This model comes with programmable batch size sorting, making it the perfect companion for an automatic Kappa cut-and-strip machine of the third generation. Wires up to 3.5 m in length are sorted and deposited.


Technical Data

Wire diametermax. 35 mm
Wire lengthapprox. 1503.500 mm
Conveyor belt--

KA 3000 / KA 6000

Deposit systems

These wire deposit units are intended for depositing "over-length conductors“ neatly and extended to full length. The KA 3000 deposit unit is suitable for depositing wires up to about 3.000 mm in length; the KA 6000, for depositing wires up to about 6.200 mm in length. The maximum wire diameters for the two models are 18 mm and 35 mm, respectively. With the KA 3000-2 model, two separate batches can be deposited in separate trays.


Technical data

KA 3000KA 6000
Conductor diametermax. 18 mmmax. 35 mm
Conductor length3503.000 mm3506.200 mm
Conveyor beltactive

KRI 800-T / dps 272


The KRI 800-T wire coiler is designed for the efficient coiling of long conductors. After coiling, the guide posts automatically lower, and the safety cover opens to allow easy removal of the coiled wire. The KRI 800-T is particularly well suited to large-size conductors.

The Komax dps 272 coiler is the perfect choice for coiling over-length cables. With its dual-drum design and automatically sliding safety cover, processing is fast, reliable and safe.


Technical Data

KRI 800-Tdps 272
Wire diametermax. 35 mmmax. 15 mm
Wire lengthmin. 1.000 mm
Inside diameter of coil,
Outside diameter of coil
250600 mm,
max. 750 mm
100300 mm,
max. 400 mm
Coil weightmax. 80 kgmax. 10 kg

dps 261


The Komax dps 261 binder binds wire coils quickly and gently. Its ease of operation and great reliability make this device an ideal supplement for all coilers. The knot created in binding is easy to undo. The Komax dps 261 binder is operated with a foot pedal. A high degree of safety and reliability are ensured by the needle slide clutch. The Komax dps 261 binder not only processes wires. It can also be used to bind other products.


Technical data

Inside diameter of coilmin. 120 mm
Coil height/push-through heightmax. 145 mm
RPM of turntable/speedapprox. 0.67 sec./cycle


Manual coiler-uncoiler

Easy, manual coiling of cables. By using a built-up measuring unit in combination with the compact shears, the entire cut to length and winding process can be carried out simply and economically.


Technical data

Max. cable diameter for shears 20 mm, optionally up to 35 mm
Max. cable outer diameter for measuring unit 35 mm
Weight of final productUp to 100 kg
Digital product catalog
Anrufen E-Mail Top

Callback Service

Callback Service
We would be happy to call you back for a consultation!